|
Wesolok Q | |
Highly dispersible colloidal alumina for fiber binding | |
Wesolok Q alumina rigidizer is a non-dusting coarse powder ready for fast dispersion in fiber slurries for bonding fiber shapes that are more refractory and safer to use than colloidal silicas. | |
|
|
No pre-dispersing or aging - | Can be added dry to vacuum forming fiber slurries without pre-dispersing or aging, saving extra steps and equipment costs. |
Withstands Higher Temperatures - | High purity alumina provides low reactivity and can be used to replace colloidal silica where greater refractoriness at use temperatures is required. |
Flocs with Cationic Starch - | The lower surface charge of the alumina particles enables them to floc successfully with cationic starch. |
No Cristobalite - | Completely cristobalite free at use temperature, eliminating a common source of thermal shrinkage and health-related concerns. |
Typical Physical Properties | |||
Color | White | ||
Consistency | Dry powder | ||
pH (20% sol) | 3 - 4 | ||
Average particle size (nm) | 70 | ||
Concentration limit (sol)* | 23% | ||
Loss on Ignition** | 7—8% | ||
Toxicity | Non-toxic. Do not breathe dust. Dispersions are mildly acidic. Protect eyes from splashes. See MSDS | ||
Packaging | Fiber drums, 400 lbs net, loose or 20 lb bags; cartons, 60 lbs net. | ||
*Higher concentrations form thixotropic gels on standing **Typical value for Wesolok Q bonded fiber products. |
WesBond Corporation 1135 East 7th Street Wilmington, DE 19801
phone (302) 655-7917 fax (302) 656-7885
e-mail the webmaster
|