Navigation bar for WesBond.com

 

Wesil HT
High temperature system for molten metal contact
Wesil HT is a complete refractory fiber floccing and bonding system designed for thermocouple shields. Wesil HT contains a heat-setting proprietary binder for green hardness, and refractory additives that allow conventional refractory ceramic fibers to withstand molten steel contact at 2700oF. 


Wesil HT offers these advantages

Significantly Reduced Costs - Typically reduces formula costs 30-40% below colloidal alumina/starch systems.
Hard, strong fiber shapes - Proprietary resin sets at drying temperatures (250oF) to give dense, hard green fiber shapes.
Reduces Fluxing and Shrinkage - Alumina coating of fibers maintains their integrity at high temperatures, allowing for successful operation at temperatures several hundred degrees higher than normal..
 
Typical Physical Properties

Request More Info

MSDS/SDS (.PDF)

Return to Systems

Color Cream
Consistency Medium density dry powder
Approximate Bulk Density (pcf) 29
Loss on Ignition* 4 5% (water of hydration)
Fusion Point (Inorganic Binder) 2400oF
Toxicity Non-toxic. Mildly acidic (pH = 4.5) See MSDS.
Packaging Fiber drums, 250 lbs net; cartons, 45 lbs net.
*Typical value for Wesil HT bonded fiber products.
 

WesBond Corporation

1135 East 7th Street

Wilmington, DE  19801

phone (302) 655-7917 fax (302) 656-7885 

Copyright
2000 Wesbond Corporation, all rights reserved. Terms of use.

e-mail the webmaster
Last modified Friday, September 16, 2016