Navigation bar for WesBond.com

 

Wesolok F
Alumina floccing and bonding system for refractory fibers
Wesolok F is a complete floccing and bonding system for aluminosilicate and alumina fibers recommended for use when contact with molten metal occurs. It contains cationic starch and a blend of high alumina binders that gives hardness and strength equivalent to colloidal silica/starch systems, but with reduced shrinkage and cristobalite formation at high use temperatures (2300-3000F).


Wesolok F offers these advantages

Easier Forming of Alumina Fiber Shapes -
A complete alumina bonding systems that eliminates steps and replaces less effective colloidal silica-starch systems.
Higher Temperature Capability - This alumina based system is highly effective for continuous use to 3000F.
Better Results with Lower Quality Fibers - Alumina coats lower quality fibers thereby maintaining their integrity at high temperatures. This reduces fluxing and shrinkage, and improves the properties of bonded shapes.
No Cristobalite - Completely cristobalite free at use temperature, eliminating a common source of thermal shrinkage and health-related concerns.
 
Typical Physical Properties

Request More Info

MSDS/SDS (.PDF)

Return to Systems

Color Cream
Consistency Medium density dry powder
Approximate Bulk Density (pcf) 32
Loss on Ignition* 7 8%
Fusion Point (Inorganic Binder) 3200oF
Toxicity Non-toxic. Do not breathe dust. Dispersions are mildly acidic. Protect eyes from splashes. See MSDS.
Packaging Fiber drums, 400 lbs net; cartons, 60 lbs net.
*Typical value for Wesolok F bonded fiber products.
 

WesBond Corporation

1135 East 7th Street

Wilmington, DE  19801

phone (302) 655-7917 fax (302) 656-7885 

Copyright
2000 Wesbond Corporation, all rights reserved. Terms of use.

e-mail the webmaster
Last modified Friday, September 16, 2016